Futaba GY601 Gyro
I've installed a Futaba GY601 Gyro with Digital Servo S9251 in my X-Cell Fury Extreme:
GY601 Amplifier
GY601 Gyro
S9251 Servo sold as package with the GY601
Speed: 0.07sec/60o
Torque: 3.7kg-cm
Fury Extreme
I started off using a Futaba GY401 in the Fury, but it didn't have the holding power I was looking for; the tail always felt soft. I replaced with the 601 and the tail is now rock solid.
Fury Extreme 90 GY601 Settings:
I only use the gyro in AVCS Mode (heading Hold)
|
Parameter |
Value |
|
GDir - Gyro Reverse |
REV |
| G:1 - Gyro Gain Adjustment | 100% |
| G:2 - Gyro Gain Adjustment | Not used |
| ACGA - Rudder Control Gain | 120% |
| ACGB - Rudder Control Gain | 120% |
| NCGA - Rudder Control Gain | Not used |
| NCGB - Rudder Control Gain | Not used |
| D1IA - Control Delay (Delay when rudder stick operated) | 0% |
| D1IB - Control Delay (Delay when rudder stick operated) | 0% |
| D1DA - Control Delay (Delay when rudder stick released) | 0% |
| D1DA - Control Delay (Delay when rudder stick released) | 0% |
| Trk - Gain Tracking (Adjusts left and right braking tracking) | 0% |
| Mode - Operation Mode Setting | CMT |
| Fmod - Flight Mode | F3C |
| AVS - AVCS Sense | 100% |
| LmtA - Linkage Limit Setting | 102% |
| LmtB - Linkage Limit Setting | 145% |
| Gyro Gain Normal Mode - Set via Code 44 on JR10X Radio | 35% (74% JR10X) |
| Gyro Gain Idle Up 1 Mode - Set via Code 44 on JR10X Radio | 35% (74% JR10X) |
| Gyro Gain Idle Up 2 Mode - Set via Code 44 on JR10X Radio | 35% (74% JR10X) |